Acts of Labour Department
THE MOTOR TRANSPORT WORKERS ACT, 1961
FORM NO. I
(See sub-rule (2) of rule 4, sub-rule (1) of rule 8 and sub-rule (1) of rule 11 of the 1 [Tamil Nadu] Motor Transport Workers’ Rules, 1965)
Application for the registration of a motor transport undertaking under sub-section
(2) of section 3 of the Motor Transport Workers’ Act, 1961 (Central Act 27 of 1961).
-
Calendar year for which this application is made.
-
Name of the motor transport undertaking.
- (i) Full address of the headquarters of the undertaking
- (ii) Full address/addresses of each of the units of the undertaking.
-
Full address to which communications relating to the motor transport undertaking including its various units should be sent.
-
Nature of motor transport service, e.g., passenger service, freight service.
-
Details of routes
|
Number of vehicles in the route |
From |
To |
Distance |
Total number of trips per day |
Total Kilometres per day |
Passenger service |
Freight Service |
(1) |
(2) |
(3) |
(4) |
(5) |
(6) |
(7) |
-
Total number of motor transport vehicles on the last date of the preceding year (with particulars of registration number of the vehicles).
-
Maximum number of motor transport workers employed on any day during the preceding year and proposed to be employed on any day during the year for which application is made.
-
Full name of the employer and his residential address.
-
Full name and residential address of other partners if the motor transport undertaking is a firm within the meaning of the Indian Partnership Act, 1932 (Central Act IV of 1932), or other directors in the case of a company within the meaning of the Companies Act, 1956.
-
Whether the contribution to Tamil Nadu Labour Welfare Fund (due at the time of presenting the application) has been paid and if so, furnish the full details of payment (viz., cheque/demand draft No. and date/or money order receipt number and date).
-
Amount of fee Rs. (Rupees ) paid in Treasury on (vide Chalan No. enclosed).
Signature of the employer
Date:
(This form should be completed in ink in block letters or typed).
THE TAMIL NADU CATERING ESTABLISHMENTS ACT, 1958
FORM NO. I
[See sub-rule (1) of rule 3 and sub-rule (1) of rule 6.]
APPLICATION UNDER SUB-SECTION (1) OF SECTION 4 FOR REGISTRATION/APPLICATION UNDER SUB-SECTION (4) OF SECTION 4 FOR RENEWAL OF REGISTRATION CERTIFICATE FOR THE CALENDAR YEAR
-
Full name of the catering establishment :
2. (i) Full postal address and situation of the
Catering Establishment
(ii) Full address to which communications
relating to the catering establishment
to be sent:
3. (i) Maximum number of employees proposed
to be employed on any one day during the
calendar year:
(ii) Number of employees ordinarily to be
employed in the catering establishment:
-
Full name and residential address of the person
Who shall be manager of the catering establishment:
-
Full name and residential address of the employer
Other than the manager, that is to say---
(i) the proprietor of the catering establishment;
(ii) directors in case of a public limited liability
establishment;
(iii) where a managing agent has been appointed,
the name of managing agent and directors thereof;
and
(iv) shareholders, if any.
-
Financial resources of the employer (e.g., particulars
and value of movable and immovable properties,
bank reference, income-tax assessment, etc.)
-
Previous experience of the applicant in the
Catering industry:
-
Whether the proposed site of the premises amounts
to the alteration of the site of any existing premises
and if so, the reasons for such alteration. [ The
employer should quote the licence or any other order
from the Local Authority (Corporation, Municipality,
Panchayat Board or Specially Notified Area)]:
-
Whether any catering establishment was closed by the
applicant during the period of twelve months
immediately preceding the date of the application and
if so, the reasons therefore:
-
Whether the contribution to Tamil Nadu Labour
Welfare Fund for the [previous year] has been paid and
if so, furnish the full details of payment (viz., Cheque/
Demand Draft No. and date/money order Receipt No.
And date):
11. Amount of fee Rs. (Rupees )
paid in Treasury on
(vide Chalan No. enclosed)
Signature of employer:
Date:
Signature of Manager:
Date:
Note: (1) This form shall be completed in ink in block letters or typed.
- (2) If any of the persons named against item 5 is a minor, the fact shall be clearly stated.
- (3) In the case of catering establishment where a managing agent or agents have been appointed under the Companies Act, 1956 (Central Act 1 of 1956), the information required in item 5 shall be supplied only in respect of that person or persons.
THE CONTRACT LABOUR (REGULATION AND ABOLITION) ACT, 1970.
FORM IV
[SEE RULE 21(1)]
Application for licence
1. Name and address of the contractor (including his father’s name in case of individuals).
2. Date of birth and age (in case of individuals).
3. Particulars of Establishment where contract labour is to be employed:
- (a) Name and address of the Establishment:
- (b) Type of business, trade, industry, manufacture or occupation, which is carried on in the establishment:
- (c) Number and date of Certificate of Registration of the Establishment under the Act:
- (d) Name and address of the Principal Employer:
4. Particulars of contract labour:
- (a) Nature of work in which contract labour is employed or is to be employed in the establishment.
- (b) Duration of the proposed contract work (give particulars of proposed date of commencing and ending):
- (c) Name and address of the agent or manager of contractor at the worksite:
- (d) Maximum No. of contract labour proposed to be employed in the establishment on any date:
-
Whether the contractor was convicted of any offence within the preceding five years. If so, give details.
-
Whether the contractor has worked in any other establishment within the past five years. If so, give details of the Principal Employer, Establishments and nature of work.
-
Whether a certificate by the Principal Employer in Form V is enclosed.
-
Amount of licence fee paid – No. of Treasury Challan and date.
-
Particulars of security deposit, if any, requested to be adjusted, including Treasury Receipt number and date.
-
The amount of security or balance, if any, after adjustment of amount to be refunded under rule 31, deposited with Treasury Receipt number and date.
Declaration:- I hereby declare that the details given above are correct to the best of my knowledge and belief.
Place : Signature of the applicant
Date : (Contractor)
Note :- The application should be accompanied by a Treasury Receipt for the appropriate amount and a certificate in Form V from the Principal Employer.
(To be filled in the Office of the Licensing Officer)
Date of receipt of the application with challan for fees/Security Deposit.
Signature of the Licensing Officer.
THE PLANTATIONS LABOUR ACT, 1951
FORM 1-A
[Prescribed under sub-rule (1) of rule 2-A]
APPLICATION FOR THE REGISTRATION OF PLANTATION
1. Name of the Plantation.
2. Nature of the Estate (whether coffee, tea, rubber,
cinchona, cardamom etc.,) with hectarage of each
division.
3. Maximum number of employees employed on any
one day during the calendar year.
4. Full postal address and situation of the plantation.
5. Name of the employer who has ultimate control over
the affairs of the plantation. In case of a minor, the
fact shall be clearly stated.
6. Full address to which communication relating to the
plantation to be sent.
7. Full name and residential address of the person other
than the employer who manages the plantation.
8. Amount of fee paid Rs. (Rupees ) (Vide challan No. dated of the Treasury)
Signature of the employer
Date:
Instruction: This form shall be completed in ink in Block letters or typed.
SCHEDULE V-A
[See rule 12(1)]
FORM LM-1
Application form for Licence as Manufacturer of Weights and Measures under the Standard of Weights and Measures (Enforcement) Act, 1985.
To
To be filled Comments
by the of the
applicants Inspecting
Officer.
(1) (2) (3)
1. Name of the manufacturing concern
for which licence in desired.
2. Complete address of the concern
3. Date of establishment of workshop/
factory
4. Name(s) and address(es) of proprietor(s)
and/or partner(s) and managing director(s)
in the case of a Limited Company.
5. The date and number of registration in the
case of a Registered Factory.
6. Number and date of current Municipal Trade
Licence.
7. Nature of manufacturing activities at present.
8. The type of articles proposed to be
manufactured, viz.-
- (i) Weights
- (ii) Measures
- (iii) Weighing Instruments
- (iv) Measuring Instruments with
Details in each case.
9. The number of persons employed in each
of the above branches of production.
- (i) Skilled
- (ii) Unskilled
- (iii) Specialists trained in the line.
THE BEEDI AND CIGAR WORKERS (CONDITIONS OF EMPLOYMENT) ACT, 1966
FORM NO. I
(See rules 3 and 4)
Application for grant or renewal of licence for the financial year
1. Full name of the industrial premises.
2. (i) Full postal address and situation of the industrial premises.
(ii) Full address to which communications relating to the industrial premises should be sent.
(iii) Full address of the applicant.
3. Maximum number of employees proposed to be employed on any one day during the financial year.
4. Full name and residential address of the person who shall be the employer for the purposes of the Act.
5. If the employer is a partnership, company, etc. full name and residential address of other partners or directors, etc. (See Note 1 at the end).
6. Financial resources of the employer (e.g., particulars and value of movable and immovable properties, bank reference, income-tax assessment, etc.)
7. Whether the employer is a trade mark holder registered under the Trade and Merchandise Marks Act, 1958 (Central Act 43 of 1958).
8. Value of beedies or cigars or both manufactured at the industrial premises during the preceding financial year.
9. Previous experience of the applicant in the Industry.
10. Whether any industrial premises was closed by the applicant during the period of twelve months immediately preceding the date of the application and if so, the reasons therefore.
11. Whether any industrial premises was closed by the applicant during the period of twelve months immediately preceding the date of the application and, if so, the reasons therefore.
12. Source of obtaining tobacco.
13. Whether the beedies or cigars or both manufactured by the applicant will be sold and marketed by himself or through proprietor or a registered user of a trade mark registered under the Trade and Merchandise Marks Act, 1958 (Central Act 43 of 1958) or any other person.
14. Whether the plans of the premises are enclosed.
15. Amount of fee Rs. (Rupees
paid in Treasury on vide chalan No.
enclosed.
I hereby declare that the particulars furnished by me in the form are to the best of my knowledge and belief accurate.
Date: Signature of Applicant
Note 1:- Where an industrial premises are run or proposed to be run by a contractor for or on behalf of another person or persons or company etc., the said other person or persons or company etc., is under the Act the employer and particulars to be entered for “employer” in the Form should be in regard to such person, persons or company, etc.
The application for licence may however be made either by the contractor or the employer.
Note 2:- (1) This form shall be completed in ink in block letters or typed.
(2) If any person named against item 5 is a minor, the fact shall be stated clearly.
FORM NO. I
[See Rule 17(1)]
Application for Registration of Establishments Employing Contract Labour
1. Name and location of the Establishment.
2. Postal address of the Establishment
3. Full name and address of the Principal Employer (furnish father’s name in the case of individuals).
4. Full name and address of the Manager or person responsible for the supervision and control of the establishment.
5. Nature of work carried on in the establishment.
6. Total number of workmen directly employed.
7. Particulars of contractors and contract labour:
- (a) Names and Addresses of Contractors.
- (b) Nature of work in which contract labour is employed or is to be employed.
- (c) Maximum number of contract labour to be employed on any day through each contractor.
- (d) Estimated date of commencement of each contract work under each contractor.
-
Particulars of Treasury Receipt enclosed ………………………………………
(Name of the Treasury, Amount & Date)
I hereby declare that the particulars given above are true to the best of my knowledge and belief.
Principal Employer
Seal and Stamp
Office of the Registering Officer
Date of receipt of application
THE CONTRACT LABOUR (REGULATION AND ABOLITION) ACT, 1970.
FORM NO. VII
[See Rule 29(2)]
Application for Renewal of Licence
1. Name, age, father’s name and address of the contractor
2. Name and address of the principal employer
3. Name, age, father’s name and address of the Agent or Manager of the Contractor at the worksite.
4. Number and date of licence
5. Date of expiry of the previous licence
6. Particulars of contract labour-
a) Nature of work in which contract labour is employed or is to be employed in the Establishment.
b) Duration of the proposed contract work (give particulars of proposed date of commencing and ending.
c) Name and address of the agent or Manager of Contractor at the worksite.
d) Maximum number of contract labour proposed to be employed in the establishment on any date.
7. Whether the licence of the contractor was suspended or revoked.
8. No. and date of treasury receipt enclosed.
Date: Signature of the Contractor or Agent or Manager of the Contractor.
(To be filled in Office of the Licencing Officer)
Date of receipt of the application with
Treasury Receipt No. and date.
Signature of the Licencing Officer
10. The monogram or trade mark intended
to be imprinted on articles to be manufactured.
11. Details of machinery, tools, accessories, etc.,
owned and used for manufacturing weights,
measures, etc.
12. Have you a foundry/workshop on ownership or
longterm lease? If not, state the nature and details of
arrangements made or to be made in this regard.
13. Indicate facilities for steel casting and hardness
testing of vital parts.
14. Is electric energy available?
15. Have you received any loan from Government?
If so, give details.
16. Name of bankers, if any
17. Sales tax Registration number.
18. Give details of quota allotment of raw materials for
the last three years.
19. Have you applied previously for licence? If so, with
what results?
20. When can you produce for inspection samples of
your products for which licence is desired?
To be certified by the applicant
Certified that I/We have read the Standards of Weights and Measures (Enforcement) Act, 1985 and the Tamil Nadu Standards of Weights and Measures (Enforcement) Rules, 1989 and agree to abide by the same and also the administrative orders and instructions issued or to be issued thereunder.
I/We agree to deposit the scheduled licence fees with Government as soon as required to do so by the Licencing Authority.
All the information furnished above is true to the best of my/our knowledge.
Place:
Date : Signature and designation.
To be filled in by the Departmental Officer of the Government of Tamil Nadu-
Date of receipt of application
Serial Number of application
Date of Inspection
Recommendation of Inspecting Officer
Place:
Date:
Signature and designation of the Inspecting Officer
Final orders of Licencing Authority
Licence granted/refused
Licence number
Valid till
Place:
Date:
Signature and designation.
SCHEDULE V-A
[See rule 12(1)]
FORM LR-1
[Application form for Licence as Repairers of Weights and Measures, Weighing Instruments under the Standard of Weights and Measures (Enforcement) Act, 1985.]To
To be filled Comments
by the of the
applicants Inspecting
Officer.
(1) (2) (3)
1. Name of the repairing concern/person
seeking the licence.
2. Complete address of the workshop
3. Date of establishment
4. Name(s) and address(es) of proprietor(s)
and/or partner(s) and managing director(s)
in the case of a Limited Company.
5. Number and date of current Municipal Trade
Licence.
6. The types of articles you propose to repair.
7. Area in which you wish to operate
8. Extent of previous experience in the line.
9. The number of skilled staff employed in
the workshop.
10. Is electric energy available
11. Have you sufficient stock of loan/
test weights, etc. Please give details.
12. Have you previously applied for
repairer licence. If so when and with what
results.
To be certified by the applicants.
Certified that I/We have read the Standards of Weights and Measures (Enforcement) Act, 1985, and the Tamil Nadu Standards of Weights and Measures (Enforcement) Rules, 1989 and agree to abide by the same and the administrative orders and instructions issued or to be issued thereunder.
I/We agree to deposit the scheduled licence fees and security deposit with Government as soon as required to do so by Licensing Authority.
All the information furnished above is true to the best of my/our knowledge.
Place:
Date: Signature and Designation
To be filled in by Departmental Officer of the Government of Tamil Nadu
Date of receipt of application ……………………..
Serial number of application ………………………
Date of Inspection ………………………..
Recommendation of Inspecting Officer :
Place:
Date:
Signature and designation of the Inspecting Officer
Final Orders of Licensing Authority:
Licence granted/refused
Licence No.
Valid till: Date:
Place:
Date: Signature and designation
SCHEDULE V-A
[See rule 12(1)]
FORM LD-1
[Application form for Licence as Dealer of Weights and Measures, Weighing Instruments under the Standard of Weights and Measures (Enforcement) Act, 1985.]
o
To be filled Comments
by the of the
applicants Inspecting
Officer.
(1) (2) (3)
1. Name of the establishment/shop/person
seeking the licence.
2. Complete address of the establishment,etc.
3. Date of establishment
4. Name(s) and address(es) of proprietor(s)
and/or partner(s) and managing director(s)
in the case of a Limited Company.
5. Number and date of current Municipal Trade
Licence.
6. Category of articles sold at present
7. Sales Tax-Registration Number Do
you intend to import weights, etc.,
from places outside the State? If so,
indicate sources of supply ……………..
………………………………………….
8. (Give details of manufacturer’s trade mark
monogram and his licence number).
9. Have you ever applied for a dealer’s licence
either in this State or elsewhere, If so, give
details.
To be certified by the applicants.
Certified that I/We have read the Standards of Weights and Measures (Enforcement) Act, 1985, and the Tamil Nadu Standards of Weights and Measures (Enforcement) Rules, 1989 and agree to abide by the same as well as the administrative orders and instructions issued or to be issued thereunder.
I/We agree to deposit the scheduled licence fees and security deposit with Government as soon as required to do so by Licensing Authority.
All the information furnished above is true to the best of my/our knowledge.
Place:
Date: Signature and Designation
To be filled in by Departmental Officer of the Government of Tamil Nadu
Date of receipt of application ……………………..
Serial number of application ………………………
Date of Inspection ………………………..
Recommendation of Inspecting Officer :
Place:
Date:
Signature and designation of the Inspecting Officer
Final Orders of Licensing Authority:
Licence granted/refused
Licence No.
Valid till: Date:
Place:
Date: Signature and designation
SCHEDULE V-B
[See rule 12(2)]
FORM LM-2
[Application for renewal of licence as Manufacturer of Weights, Measures, WeighingInstruments and Measuring Instruments under the Standards of Weights and Measures (Enforcement) Act, 1985.]
To
1. Name and complete address of the
manufacturing concern for which
licence is desired.
2. Manufacturers Licence No.
3. Names and addresses of Proprietors and/or
partners and Managing Directors in the
case of Limited Company.
4. a) The Type of articles which are manufactured
as per licence granted
b) Do you propose any charge
5. The monogram of trade marks used on
articles manufactured by you.
6. Details of workshop facilities available
7. Sales Tax Registration No.
To be certified by the applicants
CERTIFIED that I/We have read the Standards of Weights and Measures (Enforcement) Act, 1985 and the Tamil Nadu Standards of Weights and Measures (Enforcement) rules, 1989 and agree to abide by the same and also the administrative orders and instructions issued or to be issued thereunder.
I/We have deposited the scheduled licence fees of Rs. ……………….(Rupees …………………………………………only) to the Sub-Treasury/Bank on …………. And the original chalan is enclosed.
All the information furnished above is true to the best of my/our knowledge.
Place:
Date; Signature and Designation.
SCHEDULE V-B
[See rule 12(2)]
FORM LR-2
[Application for renewal of licence as Repairer of Weights, Measures, WeighingInstruments and Measuring Instruments under the Standards of Weights and Measures (Enforcement) Act, 1985.]
To
1. Name and complete address of the
repairing concern/person seeking the
licence.
2. Repairers Licence No.
3. Names and addresses of Proprietors and/or
partners and Managing Directors in the
case of Limited Company.
4. Number and date of current Municipal
Trade Licence
5. a) The Types of articles which are repaired
as per licence granted
b) Do you propose any charge
6. Area in which you are operating
7. Have you sufficient stock of loan/
test weights, etc.?
8. Please give details with particulars
of stamping.
To be certified by the applicants
CERTIFIED that I/We have read the Standards of Weights and Measures (Enforcement) Act, 1985 and the Tamil Nadu Standards of Weights and Measures (Enforcement) rules, 1989 and agree to abide by the same as well as the administrative orders and instructions issued or to be issued thereunder.
I/We have deposited the scheduled licence fees of Rs. ……………….(Rupees …………………………………………only) to the Sub-Treasury/Bank on …………. and the original chalan is enclosed.
All the information furnished above is true to the best of my/our knowledge.
Place:
Date; Signature and Designation.
SCHEDULE V-B
[See rule 12(2)]
FORM LD-2
[Application for renewal of licence as Dealer in Weights, Measures, Weighing and Measuring Instruments under the Standards of Weights and Measures (Enforcement) Act, 1985.]
To
1. Name and complete address of the
establishment/shop/person seeking the
licence.
2. Dealer’s Licence No.
3. Date of establishment
4. Names and addresses of Proprietors and/or
partners and Managing Directors in the
case of Limited Company.
5. Number and date of current
Municipal Trade Licence
6. Category of articles sold at present.
7. Sales Tax Registration Number
8. Are you intending to import weights, etc.,
from places outside the State. If so, indicate
sources of supply from the State/States.
(Give details of Manufacturer’s trade mark/
monogram and his licence No.)
To be certified by the applicants
CERTIFIED that I/We have read the Standards of Weights and Measures (Enforcement) Act, 1985 and the Tamil Nadu Standards of Weights and Measures (Enforcement) rules, 1989 and agree to abide by the same as well as the administrative orders and instructions issued or to be issued thereunder.
I/We have deposited the scheduled licence fees of Rs. ……………….(Rupees …………………………………………only) to the Sub-Treasury/Bank on …………. and the original chalan is enclosed.
All the information furnished above is true to the best of my/our knowledge.
Place:
Date; Signature and Designation.
|